What Has Changed Recently With Gardening?

How To Repair Hose Reels?

If you want to keep garden hoses clean and neat, then making use of hose reel can be a big advantage. But at times, it gets damaged or punctured because of some reasons. There are two options that you can do in case this happens to you; either buy a replacement of its essential parts or, do repairs at home.

In regards of the category of hose reel you purchase, there’s always a time in which it will start to leak through its joining points or, it may be punctured. As a matter of fact, repairing the leaks of hose reel is not that hard since you can do the repair of hose reel cart, retractable hose reel or even the wall mounted units on your own by following the tips below.

Tip number 1. Check all connections – generally, hose reels have around 5 different connectors located on the leader hose, beginning of the faucet, garden hose, out tube and in tube. You must try tightening every connection before opting out for an expensive replacement or repairs if your hose has leak. Sometimes, loose connector may be the cause of the problem. While you are repairing the connectors, you should be certain to line up the threads to be able to avoid any damage to it.
Finding Ways To Keep Up With Gardening

Tip number 2. Change defective O-rings – this is actually among the common repair steps required to be done in most reels. When the o-rings are used for a long time, it creates the possibility of making it cracked or dry. You can buy replacement for it easily from almost any hardware store or through the internet. Before you buy one on the other hand, you have to take a look at the website of the manufacturer or the guidebook in order to confirm which size of o-ring is recommended for that model you have at home.
A Simple Plan: Tools

Tip number 3. Take out the panel – once you turned off the water supply to your hose reel, detach the hose as well as the reel. Then after, you need to use a screwdriver to be able to take out 4 bolts which are located on the knob side of case and put them in a secure place. Pull away the shield from case once done, this is to uncover the entire panel.

These are only 3 simple tips that can be a big help when you are doing a DIY repair on your hose reel. Now in case that the problem still exists, that may be the time to buy a new one.